SECTIONAL ROD MONUMENTS |
Surv-Kap Sectional Rod and
Extension Rod Monuments are multiple section survey monuments designed
to be driven into soil until the point of refusal or desired depth is
reached. This monument consists of four separate components: cap,
extension rod, lockscrew and driving rod. |
• |
Magnets included
in all caps; caps are 2" Flat or 2 1/2", 3 1/4" Flat or Dome |
• |
Where Single Rod
is required without threaded hole - see triple-fluted stakes |
• |
3/4" and
5/8" Aluminum Sectional Rod Monuments |
• |
Rod ends each
have threaded hole and lockscrew installed in one end |
• |
Both ends
are protected by plastic end caps |
|
|
Surv-Kap extension rods feature machine-faced and precision drilled
and tapped ends to freely accept every lockscrew. A high nickel and
chromium stainless steel alloy lockscrew securely fastens the Extension
Rod to the Driving Rod. A "Scratch" mark is machined 1"
from each end of the rod to assist in cap installation. Please call for custom rod lengths.
THROUGH-HOLE ROD MONUMENT CAP - SRBH-916-3 1/4 OR SRBH-916-3 1/4
FS
APPLICATIONS:
The THROUGH-HOLE ROD MONUMENT CAP is designed for use on stainless
steel sectional rod monuments. The finished monument may incorporate a
grease filled sleave and special back-fill around the upper few feet
of rod. Additionally, an access cover and PVC pipe collar may be
utilized.
FEATURES: |
• |
Installation is
quick and easy. |
• |
May be
pre-stamped, field stamped or custom cast with the user's
information. |
• |
Identifies the monument and
permits the most accurate and repeatable 3-D measurements
possible. |
|
TYPICAL INSTALLATION PROCEDURE: |
1) |
The sectional rod
monument is installed in the normal manner and driven to refusal
or until sufficiently stable ground is reached. |
2) |
The rod is cut at
the desired height and a datum is ground or filed on the end. A
punch mark may also be made in the end at this time. |
3) |
The THROUGH-HOLE ROD MONUMENT
CAP is placed on the upper end of the installed monument and is
driven over the rod until the datum produced is step 2 protrudes
above the top of the cap. |
|
ADVANTAGES:
Because all measurements are made from the end of the rod protruding
through the cap, the errors resulting from the unauthorized removal of
an attached datum or standard rod cap are eliminated. Further, the
monument can be identified and other user information provided at the
point without setting an additional monument marker. |
5/8" ALUMINUM SECTIONAL ROD MONUMENTS Surv-Kap patent
#4,254,597
|
| Model No. |
Description |
1-100 |
101-249 |
250+ |
| ER-108-1 |
1ft. Rod length x 5/8" with
lockscrew installed |
5.42 |
5.06 |
4.86 |
| ER-108-2 |
2 ft. Rod length x 5/8" with
lockscrew installed |
6.87 |
6.69 |
6.49 |
| ER-108-3 |
3 ft. Rod length x 5/8" with
lockscrew installed |
8.86 |
8.68 |
8.48 |
| ER-108-4 |
4 ft. Rod length x 5/8" with
lockscrew installed |
9.32 |
9.14 |
8.94 |
| ER-108-5 |
5 ft. Rod length x 5/8" with
lockscrew installed |
10.19 |
10.01 |
9.81 |
| Additional
Parts |
| DR-108-6* |
6" Driving Rod with 2" Pilot
& Spiral Flute |
3.85 |
3.67 |
3.47 |
| LS-108 |
Lockscrew 3/8" - 16 thread - 1
3/8" Long |
0.97 |
0.95 |
0.93 |
| SR-108-2 |
2" Flat to Fit 5/8" Smooth
Rod |
4.64 |
4.56 |
4.49 |
| SR-108-2 1/2 |
2 1/2" Flat or Dome Cap to Fit
5/8" Smooth Rod |
5.22 |
5.04 |
4.84 |
| SR-108-3 1/4 |
3 1/4" Flat or Dome Cap to Fit
5/8" Smooth Rod |
5.88 |
5.82 |
5.62 |
| RDA-5/8 |
5/8" x 4 1/2" 304 Stainless
Steel Rod Driving
Adapter |
11.86 |
11.56 |
11.23 |
3/4" ALUMINUM SECTIONAL ROD MONUMENTS Surv-Kap patent
#4,254,597
|
| Model No. |
Description |
1-100 |
101-249 |
250+ |
| ER-107-1 |
1ft. Rod length x 3/4" with
lockscrew installed |
5.47 |
5.37 |
5.26 |
| ER-107-2 |
2ft. Rod length x 3/4" with
lockscrew installed |
6.95 |
6.85 |
6.75 |
| ER-107-3 |
3ft. Rod length x 3/4" with
lockscrew installed |
8.18 |
8.08 |
7.97 |
| ER-107-4 |
4ft. Rod length x 3/4" with
lockscrew installed |
9.54 |
9.43 |
9.33 |
| ER-107-5 |
5ft. Rod length x 3/4" with
lockscrew installed |
11.42 |
11.38 |
11.35 |
| Additional
Parts |
| DR-107-6* |
6" Driving Rod with 2" Pilot
& Spiral Flute |
3.70 |
3.61 |
3.50 |
| LS-108 |
Lockscrew 3/8" - 16 thread - 1
3/8" Long |
0.97 |
0.95 |
0.93 |
| SR-107-2 |
2" Flat Kap to Fit 3/4" Smooth
Rod |
5.07 |
4.97 |
4.87 |
| SR-107-2 1/2 |
2 1/2" Flat or Dome Cap to Fit 3/4" Smooth Rod |
5.67 |
5.57 |
5.47 |
| SR-107-3 1/4 |
3 1/4" Flat or Dome Cap to Fit 3/4" Smooth Rod |
6.12 |
5.99 |
5.89 |
| RDA-3/4 |
3/4" x 4 1/2" 304 Stainless Steel
Rod Driving Adapter |
12.14 |
12.04 |
11.94 |
9/16" STAINLESS STEEL SECTIONAL ROD MONUMENTS
|
Rod ends each have threaded hole & lockscrew
installed in one end. Both ends protected by plastic caps. |
| Model No. |
Description |
1-100 |
101-249 |
250+ |
| ER-916-1SS |
1ft. Rod length x 9/16" with
Lockscrew Installed |
Call For Price |
Call For Price |
Call For Price |
| ER-916-2SS |
2ft. Rod length x 9/16" with
Lockscrew Installed |
Call For Price |
Call For Price |
Call For Price |
| ER-916-3SS |
3ft. Rod length x 9/16" with
Lockscrew Installed |
Call For Price |
Call For Price |
Call For Price |
| ER-916-4SS |
4ft. Rod length x 9/16" with
Lockscrew Installed |
Call For Price |
Call For Price |
Call For Price |
| SRB-916-3 1/4 |
3 1/4" Flat or Dome Cap to Fit 9/16"
Stainless Steel |
Call For Price |
Call For Price |
Call For Price |
| SRB-916-3 1/4FS |
3 1/4" Flat Stamped Cap to Fit 9/16"
Stainless Steel |
Call For Price |
Call For Price |
Call For Price |
| SRBH-916-3 1/4 |
3 1/4" Flat or Dome Cap w/Through-Hole
to Fit 9/16" Stainless Steel |
Call For Price |
Call For Price |
Call For Price |
| SRBH-916-3 1/4FS |
3 1/4" Flat Stamped Cap w/Through-Hole
to Fit 9/16" Stainless Steel |
Call For Price |
Call For Price |
Call For Price |
| SDP-916 |
2" x 9/16" Full Radius Datum
Point |
Call For Price |
Call For Price |
Call For Price |
| SER-916S |
4" x 9/16" Fluted Stainless
Steel Point |
Call For Price |
Call For Price |
Call For Price |
| SER-1018 |
4" x 9/16" Fluted Steel
Point |
Call For Price |
Call For Price |
Call For Price |
| RDA-9/16 |
9/16" x 4 1/2" Heat Treated 4130 Rod Driving Adapter |
Call For Price |
Call For Price |
Call For Price |
| LS-108 |
Lockscrew 3/8" - 16 Thread - 1 3/8"
Long |
0.97 |
0.95 |
0.93 |
|
|
 |
