COPPER SET POINTS

•	Control points - reference marks for use on concrete curbs & sidewalks.
•	Copper set points are made of solid copper. 7/8" head diameter top with 1/4" x 5/8" long stem.
•	Easy to install, drill 1/4" hole 7/16" - 1/2" deep. Set copper point in hole, sledge in with hammer.

Model No.	Description	PER BOX OF 250	Per BOX OF 250 QTY. 2000+
CSP-875	Copper Set Point	122.86	104.29

MAGNAILS

Magnail is a hardened masonry nail with a zinc and clear chromate coating to resist corrosion. Magnails are magnetized for 2 - 4 times greater detection with a magnetic locator.

•	Revolutionary new metal formula retains magnetism.
•	Larger center point makes nail easier to use.
•	Increased elasticity reduces breakage.

Model No.	Description	Per 100
MN-1000	1" long x 5/32" shank with 3/8" head	6.23
MN-1250	1 1/4" long x 5/32" shank with 3/8" head	8.74
MN-1500	1 1/2" long x 1/4" shank with 9/16" head	12.02
MN-2000	2" long x 1/4" shank with 9/16" head	13.11
MN-2500	2 1/2" long x 1/4" shank with 9/16" head	16.39

MAG SPIKES

The MAG SPIKE is made from premium steel that produces the most durable marker in the industry. Like the MAG NAIL, you pound it harder and find it farther.

The MAG SPIKE is magnetized for easy detection. Its large center point and 1" diameter head makes it great for control points and property corners.

Model No.	Description	Per 25
MAGSPIKE I	3" long x 3/8" shank with 1" head	23.25
MAGSPIKE II	4 1/2" long x 3/8" shank with 1" head	28.13

TRIPLE-FLUTED DRIVING STAKES

Surv-Kap's one piece a Triple-Fluted Driving Stake is for Land Surveyors who need a more effective, economical and lightweight survey marker.

Each Stake has three wide, forged flute sets offset 90° from each other for permanent security and ground holding power! They prevent any turning, twisting or removal. The rod has a 45° point with 2 1/2" pilot. The 2 1/2 inches between point and forged flutes acts as a pilot for easy starting and straight guided entry path to final installation.

Model No.	Description	1-100	101-249	250+
TFS-2F-18	18" x 3/4" Dia. TF Stake with 2" Flat Cap	10.34	10.01	9.82
TFS-2F-24	24" x 3/4" Dia. TF Stake with 2" Flat Cap	12.33	12.00	11.81
TFS-2F-30	30" x 3/4" Dia. TF Stake with 2" Flat Cap	13.48	13.15	12.97
TFS-2F-36	36" x 3/4" Dia. TF Stake with 2" Flat Cap	14.19	13.86	13.67
TFS-2F-48	48" x 3/4" Dia. TF Stake with 2" Flat Cap	15.27	14.96	14.76
TFS-2F-60	60" x 3/4" Dia. TF Stake with 2" Flat Cap	16.23	15.91	15.73
TFS-2 1/2-18	18" x 3/4" Dia. TF Stake with 2 1/2" Flat or Dome Cap	10.77	10.46	10.27
TFS-2 1/2-24	24" x 3/4" Dia. TF Stake with 2 1/2" Flat or Dome Cap	12.83	12.50	12.33
TFS-2 1/2-30	30" x 3/4" Dia. TF Stake with 2 1/2" Flat or Dome Cap	13.99	13.67	13.48
TFS-2 1/2-36	36" x 3/4" Dia. TF Stake with 2 1/2" Flat or Dome Cap	14.76	14.44	14.12
TFS-2 1/2-48	48" x 3/4" Dia. TF Stake with 2 1/2" Flat or Dome Cap	15.85	15.52	15.34
TFS-2 1/2-60	60" x 3/4" Dia. TF Stake with 2 1/2" Flat or Dome Cap	16.82	16.49	16.30
TFS-3 1/4-18	18" x 3/4" Dia. TF Stake with 3 1/4" Flat or Dome Cap	11.17	11.04	10.92
TFS-3 1/4-24	24" x 3/4" Dia. TF Stake with 3 1/4" Flat or Dome Cap	13.78	13.66	13.53
TFS-3 1/4-30	30" x 3/4" Dia. TF Stake with 3 1/4" Flat or Dome Cap	13.42	13.30	13.17
TFS-3 1/4-36	36" x 3/4" Dia. TF Stake with 3 1/4" Flat or Dome Cap	14.07	13.95	13.82
TFS-3 1/4-48	48" x 3/4" Dia. TF Stake with 3 1/4" Flat or Dome Cap	15.08	14.96	14.83
TFS-3 1/4-60	60" x 3/4" Dia. TF Stake with 3 1/4" Flat or Dome Cap	15.84	15.72	15.59

* INSTALLATION: Drive stake to desired depth, place cap on rod and apply several hammer taps to fasten cap to rod (see accessories for rod and cap drivers). No charge for stamping 10+ monument caps with identical stamping. ($25 stamping charge for 1-9 monument caps)

Triple-Fluted Driving Stakes